1/29/11

Current Project

So these are rather large blanks I am starting with. They are 6" Diameter rounds and holding them on some of my tools is a tricky prospect so I started by machining both a clamping lip onto it and drilling and tapping holes so I could bolt it directly to a faceplate for turning.
Blog2
This part of the work will eventually be machined off so there is no harm done to the actual part

1/19/11

PN635512223333

This will be the third small edition I have made so far and I must say, If I was hesitant about making editions at first, I am not anymore. They are extremely satisfying to make and there is something about seeing your work in multiples that is very pleasurable, Not to mention how it changes the pacing of actually making a particular design.  

This one was a bit more ambitious than the first two editions as far as size and time investment. The center piece is Bronze with Stainless steel ends. The inserts are aluminum and copper and the whole thing sits on a Stainless base. 
    
The starting point for this work was kind of a revisiting of a very early design element I used many years ago while I was still working out the visual language of these objects. At the time I had a good "hook" (for lack of a better term), but not the proper experience yet to execute it in an elegant manner such as this. Which is not to say the original piece isn't important, just that there is nothing wrong with taking a second swing at something good and ending up with a different result.


1/18/11

Work Featured in Make Magazine


My work has just recently been featured in Make Magazine and I thought I would send out a link to everyone. Its not exactly a fine arts publication, but it is certainly one that I thoroughly enjoy reading.
For those not familiar with the magazine, in their words it is

"The first magazine devoted entirely to DIY technology projects, MAKE Magazine unites, inspires and informs a growing community of resourceful people who undertake amazing projects in their backyards, basements, and garages. Coined Martha Stewart For Geeks by Newsweek's Stephen Levy, MAKE is one of the most highly regarded and well-published success stories in the consumer magazine space over the past year."

 It has been on newsstands for just over a week, but I wanted to wait until the electronic version was up and running so I could provide a link.

Chris Bathgate in Make